YES
End of procedure.
NO
Go to C
NO
Go to C
C
Check the fuse on the power supply board. Is it open?
YES
Replace the fuse.
Is the problem resolved?
YES
End of procedure.
NO
Go to D
NO
Go to D
D
Are the control board contacts and the power supply board contacts properly made?
NO
Properly make the contacts.
Is the problem resolved?
YES
End of procedure.
NO
Go to E
YES
Go to E
E
Replace the connector between the power supply board and the control board.
Is the problem resolved?
YES
End of procedure.
NO
Replace the power supply board.
Is the problem resolved?
YES
End of procedure.
NO
Contact Technical Support.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)