OKIDATA DOC-IT3000, Service Manual

Page: 203 / 428

Page: 124
Service Guide DOC-IT3000/4000
Chapter 3 Maintenance & Disassembly
3.2.39 Paper Eject Sensor Lever and Rollers
· Turn the paper eject roller assembly over and remove the paper eject sensor lever (1).
· Remove the E-clip (2) and remove the paper eject idle gear (3) from the sheet guide (4).
· Remove the face-up paper eject roller shaft (5) with paper eject rollers (6).
· Remove the paper eject roller shaft (7) with face-up paper eject rollers (8).
· Detach the sheet separator (9).
Note:
The face-up paper eject roller shaft and the paper eject roller shaft are the same roller
and have the same part number.
P/N 51111401 Paper Eject Roller Shaft B.2.09
P/N 53334501 Paper Eject Roller (Face-up) B.2.09
P/N 53528101 Sensor Lever (Paper Eject) B.2.09
P/N 51005201 Sheet Guide B.2.09
P/N 50705301 E-Clip B.2.09
P/N 51222801 Idle Gear (Paper Eject) B.2.09
P/N 53528201 Separator: Sheet B.2.09
P/N 53334401 Paper Eject Roller B.2.09