OKIDATA DOC-IT3000, Service Manual

Page: 270 / 428

Page: 172
Service Guide DOC-IT3000/4000
Chapter 3 Maintenance & Disassembly
3.3.03 Service Mode
Note:
The Service Mode should not be accessed by end users.
The Service Mode is accessed through the Administration Mode.
To access the Service Mode:
· Verify that the Doc-It 3000/4000 is connected to the Doc-It controller.
· Verify that the Doc-It 3000/4000 is initialized.
· Press and hold the
ENTER key for five seconds.
· Release the ENTER key.
· ADMINISTRATION will be displayed on the LCD.
· Open the scanner cover.
· While pressing the
START button of the scanner unit, press and release the ENTER
key.
· The word Service will be displayed on the LCD.
· To move forward through the adjustments, press the down arrow key.
· To move back through the adjustments, press the up arrow key.
· Check marks indicate the current setting.
· Press the
STOP key twice to exit the service menu. This will return you to the
administration menu.
· Exit the Administration Mode by pressing any of the four mode keys (Printer, FAX,
Scanner, or Copier).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)