OKIDATA DOC-IT3000, Service Manual

Page: 132 / 428

Page: 86
Service Guide DOC-IT3000/4000
Chapter 3 Maintenance & Disassembly
3.2.01 Preliminary Items
· Turn the power switch (1) OFF.
· Detach the AC power cord (2).
· Detach the interface cable (3).
· Detach the phone cord. (Not shown)
· Remove the document tray (4)
· Remove the paper tray (5).
· Press the
OPEN lever (6) and raise the stacker cover (7).
· Push the lock levers toward the rear of the printer and open the LED holder.
· Lift and remove the image drum cartridge (8). To protect the image drum cartridge, place
it back in the styrofoam shipping package.
Notes:
The image drum counter should be reset when a new image drum is installed.
Refer to Section 3.3 of this Service Handbook for details ( ).
Refer to Section 3.4 of this Service Handbook for cleaning information ( ).
See Appendix B for paper tray part numbers ( ).
The image drum and the toner cartridge are available in the consumables kits listed
below.
####
P/N 56609701 Cord: AC 120v RSPL B.2.01
P/N 50090101 Tray: Scanner Paper RSPL B.2.01
P/N 50213602 Unit: Lower RSPL B.2.01
P/N 50066601 Stacker: Face-up (Assembly) RSPL B.2.01
P/N 56626901 Cable: 6ft DOC-IT I/F Molded RSPL B.2.01
P/N 56626101 Cord: Modular Phone RSPL B.2.01
P/N 56106601 Image Drum Kit Consumable B.2.15
P/N 52104201 Toner Cartridge Kit Consumable B.2.15