Safety
Installation Hints
■
Install your OKIFAX 5300 Plus/5600 Plus in a dust-free
location away from direct sunlight.
■
Do not plug your OKIFAX into a power source shared by
equipment which produces electrical noise (i.e., air
conditioners, etc.).
■
Leave electronic adjustments to authorized service
personnel.
■
The LINE terminal connects your fax machine to a
standard telephone line. To avoid damage to your
telephone system or to the OKIFAX, do not plug your fax
machine into anything other than a standard RJ-11C jack.
■
Your OKIFAX is intended to be grounded electrically and
is equipped with a three-wire grounded power cord. For
your safety, do not attempt to defeat your power cord’s
grounding plug.
■
The power outlet should be located near the
equipment and should be easily accessible.
■
The TEL port on the back of the unit is only suitable for
2-wire devices. Not all standard telephones will respond
to incoming ringing when connected to an extension
socket.
■
This equipment may not necessarily provide for the
effective hand-over of a call from a telephone connected
to the same line.
Operation and Maintenance
■
Use a dry cloth to clean the control panel and the main
body of the unit.
■
Aside from replacing the toner and image drum cartridge, do not
disassemble or attempt to service this unit yourself. Refer to a
qualified technician for service.
■
Pull out the AC plug before trying to remove any objects that may
have fallen into the machine.
■
If the unit becomes physically damaged, disconnect the
power cord immediately and arrange for its repair or
disposal.
of5356fm.pm6
6/8/98, 5:19 PM
7
