Federal Communications Commission
Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
■
Reorient or relocate the receiving antenna.
■
Increase the separation between the equipment and the receiver.
■
Plug the unit into an outlet on a circuit different from that to
which the receiver is connected.
■
Consult the dealer or an experienced radio television
technician for help.
A properly shielded interface cable must be used in order to
ensure compliance of this equipment with FCC regulations.
Changes or modifications not expressly approved by
OKIDATA may void your authority to operate this device.
Industry Canada Radio Interference Statement
This OKIDATA apparatus complies with Class B limits for radio
interference as specified in the Industry Canada Radio Interference
Regulations.
Industrie Canada Déclarations concernant les interférences
radio
Cet appareil OKIDATA est conforme aux critères établis par la
Classe B en ce qui concerne les interférences radio, tel que spécifié
par le Industrie Canada dans les Règlements relatifs aux interférences
Radio.
of5356fm.pm6
6/8/98, 5:19 PM
6
