ODA LF Series, User Manual, Page: 96 / 116

CURR?
Command for checking CC Mode setting current.
Return value "current"
ex) curr? Return value "60.0"
VOLT {value}
Command for setting input value of CV Mode. (Only available on CV Mode)
>value
Input voltage value.
ex) VOLT 10 Set voltage as10V
VOLT?
Command for checking setting voltage of CV Mode.
Return value "voltage"
ex) VOLT? Return value "10.000"
RES {value}
Command for setting input value of CR Mode. (Only available on CR Mode)
>value
Input resistance value.
ex) RES 10 Set resistance as 10 ohms
RES?
Command for checking CR Mode setting resistance.
Return value "res"
ex) RES? Return value "10.000"
WATT {value}
Command for setting input value of CP Mode. (Only available on CP Mode)
>value Input watt value.
ex) WATT 10 Set power as 10W
WATT?
Command for checking CP Mode setting watt.
Return value "watt"
ex) WATT? Return value "10.000"
- 87 -