To set up CC mode, proceed as follow.
MODE SET
▌Power ON
▌Move to MODE menu
Press MODE Key to enter MODE menu
When entering MODE menu, ">MODE SET" is displayed on 1st line of LCD
▌MODE setting
Set CC MODE by using left/right key
When CC MODE is on, "1. CC MODE" is displayed on 2nd line of LCD
※MODE change order: CC ↔ CV ↔ CR ↔ CP ↔ ON/OFF ↔ FUSE ↔ BAT
▌Saving MODE & Exit MODE menu
Press MODE key to save MODE and exit MODE menu.
After "SAVE…" is displayed on the 2nd line of LCD
present voltage and current will displayed on the 1st line
and "I-SET" will displayed on the 2nd line of LCD.
≫ Related Remote Interface Command
MODE:{CC | CV | CR |CP |ONOFF | FUSE | BAT }
MODE? 0:CC, 1:CV, 2:CR, 3:CP, 4:ON/OFF, 5:FUSE, 6:BAT
When CC mode is off, how to change current
▌Check CC MODE
When I-SET is displayed on 2nd line of LCD, CC icon lights up.
▌To set current, move cursor to the value you want to change
by using left/right key.
Control encorder switch to change your current value
≫ Related Remote Interface Command
CURR {VALUE}
CURR?
- 14 -
3-1.CC MODE (Constant Currunt)
MODE
POWER
MODE