15. Setting Encoder
Set all values or change numerical value in functional menu
16. Right Cursor or Menu Change Key
Move to the right direction. After entering Menu, this is the move key
17. Left Cursor or Menu Change Key
Move to the left direction. After entering Menu, this is the move key
18. INPUT ON/OFFKEY
Enable and disable CC,CV,CR,CP,ON/OFF,FUSE,BAT MODE
19. MODE KEY
Change CC,CV,CR,CP,ON/OFF,FUSE,BAT MODE
※ CC
→
CV→CR→CP→ON/OFF→FUSE→BAT→CC
20. SETTING & DISPLAY KEY
When input is off, you can change SETTING PAGE in ON/OFF, FUSE, BAT mode
When all mode is on, you can change DISPLAY PAGE
21. CC/CV RANG KEY
When CC/CV MODE is off, you can change RANG of CC/CV
22. IO/LOCAL KEY
As Remote Interface setting key, you can select RS232C, RS485 and TCP/IP
In Remote Interface mode, you can change to Local Mode using this key
23. ESC, ERROR, PROTECTION KEY
Can be used as Cancellation key when press the key shortly
Can be used as Checking Error Display key when an error is occurred
When Protection Mode is on, to press and hold this key will clear protection
※ In PROTECTION mode, "PROTECTION CLEAR" will be displayed after Protection is cleared
24. SAVE/RECALL, V_SENSING KEY
Press this key shortly to enter SAVE/RECALL menu or for setting in functional menu
Press and hold this key to enable or disable V_SENSING
25. SHORT ON/OFF, KEY LOCK KEY
Press this key shortly to set MAX current when CC HI RANG MODE is ON
Press and hold this key to disable KEY LOCK Mode
26. CYCLING RUN/STOP KEY
Start or Stop CYCLING MODE
- 8 -