Cycling STEP VALUE SET
▌When in Cycling mode setting menu,
CYC icon lights up and On icon lights off
▌Cycling STEP value menu setting
Move to Cycling STEP value menu by using left/right key
When Cycling menu, "4.VALUE STEP:" is displayed on 2nd line of LCD
※Cycling setting munu order: 1.FINISH_STEP ↔ 2.REPEAT_NUM ↔
3.MODE ↔ 4.VALUE STEP: ↔ 5.DELAY STEP:
▌Set STEP value by using encorder switch
▌Entering Cycling STEP value menu
Press Cycling setting key once to enter Cycling STEP VALUE menu.
▌To set Cycling STEP value, move cursor using right/left key
to the value you want to change.
And adjust the encorder switch to change value.
▌Saving Cycling STEP value
Press Cycling setting key.
After saving Cycling STEP value,
exit Cycling STEP VALUE and return to Cycling setting menu.
※ Repeat until each Step value is saved.
≫ Related Remote Interface Command
CYC:VAL:{STEP_NUM} {VALUE}
CYC:VAL:{STEP_NUM}?
- 37 -
CYCLING
SETTING
CYCLING
SETTING