To set up CR mode, proceed as follows.
MODE SET
▌Power ON
▌Move to MODE menu
Press MODE Key to enter MODE menu
When entering MODE menu, ">MODE SET" is displayed on 1st line of LCD
▌MODE setting
Set CR MODE by using left/right key
When CR MODE is on, "3. CR MODE" is displayed on 2nd line of LCD
※MODE change order: CC ↔ CV ↔ CR ↔ CP ↔ ON/OFF ↔ FUSE ↔ BAT
▌Saving MODE & Exit MODE menu
Press MODE key to save MODE and exit MODE menu.
After "SAVE…" is displayed on the 2nd line of LCD
present voltage and current shows on the 1st line
"R-SET" will show on the 2nd line of LCD.
≫ Related Remote Interface Command
MODE:{CC | CV | CR |CP |ONOFF | FUSE | BAT }
MODE? 0:CC, 1:CV, 2:CR, 3:CP, 4:ON/OFF, 5:FUSE, 6:BAT
When CR mode is OFF, how to change resistance
▌Check CR mode setting
When CR icon is on and "R-SET" is displayed on the 2nd line LCD
▌To set resistance, move cursor to the value you want to change
by using left/right cursor key.
Control encorder switch to change your resistance value
≫ Related Remote Interface Command
RES {VALUE}
RES?
3-3. CR MODE
- 20 -
MODE
POWER
MODE