To set up CV mode, proceed as follows.
MODE SET
▌Power ON
▌Move to MODE menu
Press MODE Key to enter MODE menu
When entering MODE menu, ">MODE SET" is displayed on 1st line of LCD
▌MODE setting
Set CV MODE by using left/right key
When CV MODE is on, "2. CV MODE" is displayed on 2nd line of LCD
※MODE change order: CC ↔ CV ↔ CR ↔ CP ↔ ON/OFF ↔ FUSE ↔ BAT
▌Saving MODE & Exit MODE menu
Press MODE key to save MODE and exit MODE menu.
After "SAVE…" is displayed on the 2nd line of LCD
present voltage and current shows on the 1st line of LCD
"V-SET" will show on the 2nd line of LCD.
≫ Related Remote Interface Command
MODE:{CC | CV | CR |CP |ONOFF | FUSE | BAT }
MODE? 0:CC, 1:CV, 2:CR, 3:CP, 4:ON/OFF, 5:FUSE, 6:BAT
When CV mode is OFF, how to change voltage
▌Check CV mode setting
When CV icon lights on and "V-SET" is displayed on the 2nd line LCD
▌To set voltage, move cursor to the value you want to change
by using left/right cursor key.
Control encorder switch to change your current value
≫ Related Remote Interface Command
VOLT {VALUE}
VOLT?
- 17 -
3-2. CV MODE
MODE
POWER
MODE