RS-232C Configuration
▌RS-232C is fixed as following.
Data Bit :
8
Stop Bit :
1
Parity Bit :
None
▌RS-232C data frame
< Figure 3-1 >
▌To connect your electronic load to remote device, you need standard Cross cable.
Below figure is a wiring drawing in case both cables are Female type of standard Cross cable.
Refer "1-2. Accessories and Options" to select properly by length and use.
< Figure 3-2 >
▌If the remote device equipped DB25PIN only or you want to use DB25PIN alone,
using additable adaptor cable can help you use conviniently.
Refer "1-2. Accessories and Options" for you to select properly by length and use.
< Figure 3-3 >
- 48 -
Stop
Bit
8 Data Bits
Start
Bit