Interrupting a Print Job
Introduction
The interrupt mode allows you to start any job while a job with many sets to print is exe-
cuted. The procedure for interruptting a job is as follows:
■
The interrupt key is pressed to enter the interrupt mode.
■
The current print job stops after the printing of the current set is complete.
The job information and the job settings are stored in the machine memory.
■
One or more copy, print or scan jobs can be started.
■
The interrupt key is pressed to exit the interrupt mode.
■
The suspended print job continues.
Note:
The Key Operator can disable the interrupt mode.
Note:
If a copy control device or external finisher is connected to the Océ VarioPrint 2070
Prémia Class, the interrupt mode is not available.
Before you begin
■
You can only enter the interrupt mode when the Océ VarioPrint 2070 Prémia Class
processes a job. The message box informs you when the Océ VarioPrint 2070 Prémia
Class accepts the interrupt mode request.
Interrupting a print job
1.
Press the interrupt key while a print job is processed.
[47] Press the interrupt key
Chapter 2 - The Print Function
74
Interrupting a Print Job
Summary of Contents for VarioPrint 2070
