Oce VarioPrint 2070, User Manual

Page: 110 / 224

Types of copy job settings
Introduction
The Océ VarioPrint 2070 Prémia Class has default settings, defined by Océ or by the
Key Operator.
If you place the originals in the automatic document feeder, some of the default settings
will change, according to the scanned information. You can change the settings for the
copy job.
A dog-ear is displayed on the section or the card, to indicate that you changed the default
settings.
[75] The dog-ear is displayed to indicate the changed settings
Settings When You Use the Automatic Document Feeder
When you place the originals in the automatic document feeder, the Océ VarioPrint
2070 Prémia Class proceeds as follows.
#
Procedure
Detects the dimensions of the originals. When the same paper size is available in one
of the paper trays, that size will be selected for the copy. If the paper size is not avail-
able, the most acceptable size for the copy is selected.
Calculates the necessary enlargement or reduction.
When you feed the originals long-edge, selects the portrait information and the long-
edge binding for the original and the copy settings.
When you feed the originals short-edge, selects the landscape information and the
short-edge binding for the original and the copy settings.
Settings when you use the platen
When you place an original on the platen, the Océ VarioPrint 2070 Prémia Class proceeds
as follows.
Chapter 3 - The Copy Function 110
Types of copy job settings