Oce VarioPrint 2070, User Manual

Page: 134 / 224

Improve the image quality of a copy
Introduction
The Océ VarioPrint 2070 Prémia Class uses proven technology to detect photos, rasters
and fine lines on the originals. Do not adjust the default quality settings unless you need
to create an image of deviating quality.
Check and, if necessary, adjust the settings for the following originals:
■
Originals containing extensive photos.
■
Originals that are mainly text.
Before you begin
■
To check your image quality setting, make a test copy before you start a copy job with
multiple sets.
Copying a photo with the glass platen
1.
Place and align the photo face down on the platen.
Follow the feed direction according to the dimensions of the photo.
2.
Select the 'Copy' mode .
The 'Basic settings' section automatically opens.
3.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
4.
Select 'No' in the 'Staple' function box.
5.
Activate the 'Paper' section.
Make sure that the 'Paper input' is open.
6.
Select the size and orientation of the required paper in the 'Source' function box.
Make sure that the orientation of the paper matches the feed direction of the photo.
Note:
If the size of the required paper does not match the dimensions of your photo, adjust the
enlargement or reduction
‘Make an enlarged or reduced copy’ on page 126 .
7.
Activate the 'Extra' section.
Make sure that the 'Image quality' card is open.
Chapter 3 - The Copy Function 134
Improve the image quality of a copy