Oce TDS400-CS, User Manual

Page: 232 / 326

232 User manual
Drawing
method 'Folding'
-'Input'
-'Method' Use this setting to select a folding method that
depends on the drawing method you use. If you
select 'Afnor' you can define the length, the width
and the binding edge of your folded package.
■
Select 'Standard' if.....
■
Select 'Afnor' if...
■
Select 'Ericsson' if...
(see ‘Define the drawing method’ on page 235)
Binding
method 'Folding' -
'Binding'
-'Method' ■
Select 'Off' if you don't want your folded output
to have a strip that you can perforate for filing
purposes.
■
Select 'On' if you do want your folded output to
have a strip that you can perforate for filing
purposes.
■
Select 'Reinforce' if you want your folded output
to have a reinforced strip that is pre-perforated
for filing purposes.
(see ‘Define the binding method’ on page 236)
Note:
You can only choose 'Reinforce' if your folder
has a reinforcement unit. (see ‘The reinforcement
unit’ on page 240)
Binding edge
value 'Folding'
-'Binding edge'
-'Method' Determines the width of the strip if you have
selected that your binding method is 'On'.
(see ‘Define the binding edge value’ on page 237)
Folded package
length 'Folding' -
'Package' -
'Length' Select this setting if you want to define the length of
your folded output.
(see ‘Define the folded package length’ on
page 238)
Folded package
width 'Folding'
-'Package'
-'Width' Select this setting if you want to define the width of
your folded output.
(see ‘Define the folded package width’ on page 239)
Setting Menu path Description