Oce TDS400-CS, User Manual

Page: 269 / 326

Maintain the Océ TDS400-CS 269
'Input flap open'
'Close input flap' The input flap is open. Close the input flap.
'Input flap open'
'Remove paper'
'Close input flap' The input flap was opened during the print process. Remove the
media and close the input flap again
'Roll 1 empty'
'Open roll unit' Replace the media on roll 1
(see ‘Load the media’ on page 252)
'Roll 2 empty'
'Open roll unit' Replace the media on roll 2
(see ‘Load the media’ on page 252)
'Wait for folder' The communication between the printer and the folder starts up.
Please wait.
'Folder is off' The folder is turned off. The communication between the printer
and the folder was not created.
'Folder belt full' Empty the folder belt.
'RU tape empty' The tape roll of the Reinforcement Unit is empty. Open the
reinforcement unit and replace the tape roll.
(see ‘Insert a new tape roll’ on page 273)
System message Description / solution