Oce TDS400-CS, User Manual

Page: 210 / 326

210 User manual
Introduction to scan-to-file jobs
Introduction
A basic scan-to-file job takes three steps. Feed the original, select 'Scan-to-file'
and press the start key. Every other type of scan-to-file job, where you change
the scan-to-file settings, is called an extended scan-to-file job. An extended
scan-to-file job takes one additional step. Define the scan-to-file job settings at
the scanner operator panel. When you select 'Scan-to-file', the scanner operator
panel shows five scan-to-file job templates. The scan-to-file job templates
provide access to the different settings per scan-to-file job template. When you
select a scan-to-file job template, the scanner operator panel shows the top 5
settings of the selected scan-to-file job template. The top 5 settings are the most
often used settings. You can define the top 5 settings and their values for each
scan-to-file job template with the Océ Settings Editor. You can use the scroll
wheel to see the other settings. After you start a scan-to-file job, you can
manage your jobs from the Océ Queue Manager.