Oce TDS400-CS, User Manual

Page: 199 / 326

Copy jobs 199
Make a copy on a cut sheet
Introduction
You can copy on cut sheet media if the required media type or size is not
available on the media rolls of the printer.
Before you begin
If you must enter the same value for a setting very often, you can set this value
as the default value for that setting in the Océ Settings Editor.
After you press the start key, the scanner operator panel always shows the job
number and status of the job. A copy job appears temporarily in the printer
queue of the Océ Queue Manager, a scan-to-file job appears in the selected
destination of the Océ Scan Manager.