Oce TDS400-CS, User Manual

Page: 188 / 326

188 User manual
Improve the copy quality according to the original
Introduction
You can improve the copy or scan quality even more for the following
situations.
■
You have an original from a special type.
The Océ TCS4 scanner makes sure that the copy or the scanned file has a
sharp image. You can define the 'Original type' setting manually to improve
the copy or scan quality according to the type of original you use.
■
You have a dark or light original.
The Océ TCS4 scanner detects the brightness of the image on the original
automatically and makes sure that the copy or the scanned file has a bright
image. You can adjust the brightness manually with the 'Lighter/darker'
setting to improve the copy or scan quality according to the type of original
you use.
■
You have an original with very fine details.
The Océ TCS4 scanner optimizes the image of the original automatically.
You can optimize the image manually to sharpen the fine details with the
'Scan quality' setting.
Before you begin
If you must enter the same value for a setting very often, you can set this value
as the default value for that setting in the Océ Settings Editor.
After you press the start key, the scanner operator panel always shows the job
number and status of the job. A copy job appears temporarily in the printer
queue of the Océ Queue Manager, a scan-to-file job appears in the selected
destination of the Océ Scan Manager.