Oce CS191 Phase 3, User Manual

Page: 354 / 712

6 Troubleshooting
6-64 CS191 (Phase3)
Please insert Fusing Unit
and close all doors. The fusing unit is not installed
correctly. Reinstall the consumables or parts,
or contact your technical represent-
ative.
Please install toner car-
tridge, and close all
doors. The indicated toner cartridge
is not installed correctly.
Please insert Waste Ton-
er Box and close all
doors. The waste-toner box is not in-
stalled correctly.
Please insert Image
Transfer Belt Unit and
close all doors. The image transfer belt unit is
not installed correctly.
Replenish paper. The indicated tray has run out
of paper. Load paper into the indicated tray.
(See "Loading paper into the tray 1"
on page 3-45, "Loading paper into
the tray 2, 3 or 4" on page 3-49,
"Loading paper into the LCT" on
page 3-51, and "Loading paper into
the bypass tray" on page 3-53.)
Toner cartridge (X) needs
to be replaced soon. The toner for the indicated
color is about to run out. Prepare to replace the toner car-
tridge according to your mainte-
nance agreement.
There is no Toner. Since the toner for the indi-
cated color has run out, the
machine is unable to make
copies. Replace the toner cartridge accord-
ing to your maintenance agreement.
Stapler empty. Replace
Staple Cartridge or can-
cel Staple mode. The staples have run out. Replace the staple cartridge. See
"Replacing the staples" on
page 10-9.
Misfeed detected. Since a paper misfeed oc-
curred, the machine is unable
to make copies. Clear the paper misfeed. (See
"When the message “Misfeed de-
tected.” appears" on page 6-6.)
Reinsert the following #
of originals. After clearing a paper mis-
feed, it is necessary to reload
certain pages of the original
that have already been fed
through the ADF. Load the indicated original pages
into the ADF.
Malfunction detected.
Please call your Techni-
cal Representative. The machine malfunctioned
and is unable to make copies. Inform your technical representative
of the code displayed on the touch
panel.
Now Downloading Pro-
gram Data from
Firmware server. • CS Remote Care was acti-
vated by the technical rep-
resentative.
• Internet ISW is being
downloaded.
Do not turn off the machine with the
[Power] (sub power) key while this
message is displayed.
After turning off the machine with
the [Power] (sub power) key, turn off
the main power switch, and then
contact the technical representa-
tive.
Cannot be accessed due
to unauthorized access.
Please contact your Ad-
ministrator. The authentication informa-
tion has become invalid since
the authentication attempts
have failed the specified
number of times. Contact the administrator of the
machine.
Message Cause Remedy