Oce CS191 Phase 3, User Manual

Page: 133 / 712

Before making copies 3
CS191 (Phase3) 3-47
!
Detail
When loading paper exceeding A3 size into the tray 1, the paper can have
a width up to 311.1 mm and a length up to 457.2 mm.
For details on specifying the paper size for the tray 1, refer to "To specify
a paper size (Set Size settings)" on page 8-12.
If special paper is loaded, the paper type setting must be specified. For
details, refer to "To specify a setting for special paper" on page 8-24.
2
Reminder
Be careful not to touch the surface of the paper feed roller with your
hands.
If the lateral guides are not positioned correctly for the loaded paper, the
paper size will not be correctly detected. Be sure to adjust the lateral
guides to the size of the loaded paper.
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed,
otherwise the envelopes may become wrinkled or a paper misfeed may
occur.
When loading envelopes, load them in the w orientation with the flap side
down, as shown in the illustration. If the envelopes are loaded with the
flap side up, a paper misfeed may occur. The flap side of envelopes
cannot be printed on.