Oce CS191 Phase 3 User Manual Download Page 421

Page: 421 / 712

Application functions

CS191 (Phase3)

9-23

Using the keypad, specify the first page of the chapters.

–

When [Select] is touched, the entered page is specified.

–

After the page number is specified, the page numbers are arranged
in order, starting with the lowest number.

–

To remove a page number that has been specified, touch [Edit],
touch the button for the page to be removed, and then press the [C]
(clear) key.

–

Set "Simplex/Duplex" to "1

2".

–

If the same page number is entered twice, the same page number
is specified, and there is no change to the print result.

–

If the specified page number is greater than the number of pages in
the original, that page number is ignored.

Touch [Copy Insert] or [None] under "Chapter Paper".

–

If "None" is selected, all pages of the copy are printed on the same
paper.

–

To cancel changes to the settings, touch [Cancel].

–

To cancel the "Chapters" function, touch [OFF].

Summary of Contents for CS191 Phase 3









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CS191 Phase 3

Reviews:

Related manuals for CS191 Phase 3

Brands by name

Popular brands

Oce CS191 Phase 3, User Manual

Search results

Summary of Contents for CS191 Phase 3

Reviews:

Related manuals for CS191 Phase 3

Brands by name

Popular brands