Oce CS191 Phase 3, User Manual

Page: 158 / 712

4 Basic copy operations
4-14 CS191 (Phase3)
3
Press the [Start] key.
After the original has been scanned, the following message appears.
– If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", touch [Finish] in the following screen, which appears while
the original is scanned with the ADF, to continue to step 5.
4
Load the next batch of the original, and then press the [Start] key.
– Repeat this step until all pages of the original have been scanned.
– If the original cannot be loaded into the ADF, place it on the original
glass. For details on the types of originals that can be loaded into
the ADF, refer to "Originals" on page 8-28.
– To change the scanning settings, touch [Change Setting]. For
details on changing the scanning settings, refer to "To change scan
settings for each original" on page 4-37.