Oce CS191 Phase 3, User Manual

Page: 187 / 712

Basic copy operations 4
CS191 (Phase3) 4-43
4.6 Selecting a paper setting
The paper size can be selected automatically according to the original size
or it can be specified manually. Specify the paper size according to the
corresponding procedure, depending on the desired copy settings.
2
Note
If a setting for special paper is selected for a paper drawer, that drawer
is not selected automatically with the "Auto Paper Select" setting.
(However, a paper drawer set to "Single Sided Only" is given priority to
be selected with single-sided printing.) This setting is useful for paper
drawers loaded with special paper. For details, refer to "To specify a
setting for special paper" on page 8-24.
The default setting is "Auto Paper Select".
For details on the operations that cannot be combined, refer to
"Operations that cannot be combined" on page 4-6.
The "Auto Zoom" and "Auto Paper Select" settings cannot be selected at
the same time. If the "Auto Zoom" setting was selected, the Zoom screen
appears. In the Zoom screen, specify the desired zoom setting.