Oce CS191 Phase 3, User Manual

Page: 607 / 712

Utility 13
CS191 (Phase3) 13-47
Reset Setting
Parameter Description Default Setting
System Auto Reset Specify the desired length of time until
the automatic system reset operation is
performed.
• Priority Mode:
Select the setting ("Copy", "Scan" or
"Fax") for the mode that the machine
enters when the automatic system re-
set operation is performed.
• System Auto Reset Time:
Specify the setting (between 1 and 9
minutes or "OFF") for the desired
length of time until the automatic sys-
tem reset operation is performed.
Priority mode:
Copy
System Auto Reset
Time:
1 minute
Auto Reset Select the setting (between 1 and 9 min-
utes or "OFF") for the desired length of
time until the automatic panel reset op-
eration is performed for each mode
(Copy, Scan and Fax). Copy: 1 minute
Scan: 1 minute
Fax: 1 minute
Job
Reset
When ac-
count is
changed Select whether or not the settings are re-
set when the user has changed.
This machine detects that the user has
changed when the optional key counter
has been removed or when the [Access]
key is pressed after entering user au-
thentication and account track informa-
tion. Reset
When orig-
inal is set
on ADF Select whether or not the settings are re-
set when an original is loaded into the
ADF. Do Not Reset
When
NEXT JOB
is selected Staple Setting:
Select whether the same Staple setting
from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied. OFF
Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Margin settings from the previ-
ous job are set or the settings are
canceled when that job begins and the
settings for the next job can be speci-
fied. OFF
Reset Data After Job:
Select whether the same settings for a
scan operation or for a fax transmission
from the previous job are set or the set-
tings are canceled when that job is com-
pleted and the settings for the next job
can be specified. (However, even if
"OFF" is selected, the destination is
cleared.) ON