Oce CS191 Phase 3, User Manual

Page: 608 / 712

13 Utility
13-48 CS191 (Phase3)
2
Reminder
If user authentication or account track operations are being performed,
they will be canceled after 1 minute, even if the "System Auto Reset"
parameter has been set to "OFF". However, the Enlarge Display mode is
not canceled when the "System Auto Reset" parameter is set to "OFF".
If user authentication settings have been specified or "Enhanced Security
Mode" has been set to "ON", logout from Administrator mode or user
authentication mode will be performed according to the "System Auto
Reset Time" parameter.
User Box Setting
Standard Size Setting
2
Note
For details on displaying [Standard Size Setting], contact your technical
representative.
Parameter Description Default Setting
Delete Unused User Box Specify settings for using boxes. For details, refer to the [Box Oper-
ations] of the user manual.
Delete Secure Print Doc-
uments
Auto Delete Secure Doc-
ument Specify settings for using boxes. For details, re-
fer to the [Box Operations] of the user manual. 1 day
Parameter Description Default Setting
Original Glass Original
Size Detect Paper size table 1 or 2 can be selected to
change the available settings when the paper
size is detected. For details, contact your tech-
nical representative. Table 1
Foolscap Size Setting The Foolscap paper size can be changed. There
are four Foolscap sizes: 220
e 330 mm, 8-1/2 e
13 w , 8-1/4 e 13 w , 8-1/8 e 13-1/4 w , and 8 e
13 w . For details, contact your technical repre-
sentative.
8 e 13 w