Oce CS191 Phase 3 User Manual Download Page 548

Page: 548 / 712

Managing jobs (Job List)

12-10

CS191 (Phase3)

Check the information that is displayed, and then touch [Yes] if the
correct job is indicated.

–

To quit deleting the job, touch [No].

The screen displayed before [Delete] was touched appears again, and
the job is deleted from the Current Jobs list.

Touch [Exit] or press the [Reset] key.

The screen that was displayed before [Job List] was touched appears
again.

Note

If user authentication settings have been applied and the machine is set
so that jobs cannot be deleted by other users, the job is not deleted.

Summary of Contents for CS191 Phase 3









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CS191 Phase 3

Reviews:

Related manuals for CS191 Phase 3

Brands by name

Popular brands

Oce CS191 Phase 3, User Manual

Search results

Summary of Contents for CS191 Phase 3

Reviews:

Related manuals for CS191 Phase 3

Brands by name

Popular brands