Nuova Simonelli Appia II, User Handbook Manual

Page: 33 / 150

29
ENGLISHENGLISH
2.
SAFETY PRESCRIPTION
RISK OF POLLUTION
Fig. 3
Fig. 4
This book is an integral and essential
part of the product and must be given
to the user. Read this book carefully.
It provides important information
concerning safety of installation, use
and maintenance. Save it carefully
for future reference.
After unpacking, make sure the appli-
ance is complete. In case of doubts,
do not use the appliance, but consult
a qualified technician. Packaging
items which are potentially danger-
ous (plastic bags, polystyrene foam,
nails, etc.) must be kept out of chil-
dren’s reach and must not be dis-
posed of in the environment.
Before connecting the appliance
make sure the rating plate data cor-
respond with the mains. This plate
is on the front panel at the top right
hand side of the appliance. The
appliance must be installed by qual-
ified technicians in accordance with
current standards and manufactur-
er’s instructions.
The manufacturer is not liable for
any damage caused due to failure to
ground the system. For the electri-
cal safety of the appliance, it is
necessary to equip the system with
the proper grounding. This must be
carried out by a qualified electrician
who must ensure that the electric
power of the system is sufficient to
absorb the maximum power input
stated on the plate.
In particular you must ensure that the
size of the wiring cables is sufficient
to absorb power input.
The use of adapters, multiple sockets
or extensions is strictly forbidden. If
they prove necessary, call a fully
qualified electrician.
The machine must be installed
according to the local standards in
force with regard to plumbing sys-
tems. For this reason, the plumbing
connections must be carried out by a
qualified technician.
This appliance must only be used as
described in this handbook. The
manufacturer shall not be liable for
any damage caused due to improper,
incorrect and unreasonable use.
For appliances powered at 220 -230 V,
the maximum impedance from the
mains must be no higher than 0.37
Ohm.
When installing the device, it is nec-
essary to use the parts and materials
supplied with the device itself.
Should it be necessary to use other
parts, the installation engineer needs
to check their suitability for use in
contact with water for human con-
sumption.
The machine must be installed in
compliance with the local health
standards in force for plumbing sys-
tems. Therefore, contact an author-
ized plumber.
The device needs to be supplied with
water that is suitable for human con-
sumption and compliant with the
regulations in force in the place of
installation. The installation engineer
needs confirmation from the owner/
manager of the system that the water
complies with the requirements and
standards stated above.