1 Introduction
D60700-07
5
1
Introduction
1.1
SafeCom Controller
The SafeCom Controller offers user authentication and Pull Printing
independent of printer manufacturer. Users log in either through the attached
SafeCom Color Front-end or stand-alone SafeCom ID Device.
SafeCom Controller works together the SafeCom G3 Server software and is
designed to help companies and organizations gain control over their printing
costs and document security. The SafeCom solution can be enhanced with add-
on modules to build customer specific and scalable solutions.
1.2
Requirements
Possible to connect to printer via network.
One free network socket (RJ-45 port, 10/100 BASE-TX).
One free power socket.
Web browser with use of JavaScript (Active Scripting) enabled.
It is strongly recommended to use a fixed IP address for the SafeCom
Controller and the printer.
SafeCom device license.
1.3
SafeCom Controller product
SafeCom Controller
Features a built-in 2-port switch (no need for
additional network outlet).
Supports full-duplex transmission.
Uses software S80 508.nnn, where nnn must be 760
or higher.
Connects to printer via network port.
Supplied with a switch mode power supply (Input:
100-240V~, 50-60Hz/500mA, Output: 12V, 1.25A).
1.4
SafeCom Color Front-end product
SafeCom Color
Front-end
Features a color touch-screen (4.3 inch LCD, 480 x
272 pixels, 24-bit color) with an optional built-in
card reader. It can be configured to accept login by
card and/or code. The SafeCom Front-end runs the
Microsoft Windows CE operating system.
When touching the screen you can either use your
fingertips or a PDA pen.
Color is black. Dimensions: 13.7 x 19.0 x 4.4 cm.
