2 SafeCom Controller
D60700-07
39
2.8.13
Enable Copy Control
Copy Control requires installation of a SafeCom MFP Cable plus some additional
configuration. Refer to 2.6 for details. On the SafeCom Controller web
interface you need to:
1.
Open the
Advanced Configuration
web page (2.7.2).
2.
Click
Printer
and change
Copy Enabled
to
YES
and change
Use auto
configuration to
YES
.
3.
If required you can change
Copy Idle Timeout
. When the MFP has been
idle for this timeout the user is automatically logged out. A value of 0
seconds means no timed logout.
4.
Click
Save and Continue
.
5.
Click
Restart
.
2.8.14
Restore factory default
You can either restore settings by holding down the SafeCom Controller's test
button for 8 seconds, or from the SafeCom Controller web interface:
1.
Open the
Advanced Configuration
web page (2.7.2).
2.
Click
Restore Factory Default
.
2.8.15
Specify another port than 9100
1.
Open the
Advanced Configuration
web page (2.7.2).
2.
Click
Printer
and change
Printer Port Number
to the new port number.
3.
Click
Save and Continue
.
4.
Click
Restart
.
2.8.16
Enable High Speed Print
When High Speed Print is enabled print data is to be sent directly (and
unencrypted) to the printer from the SafeCom server rather than through the
SafeCom Controller.
1.
Open the
Advanced Configuration
web page (2.7.2).
2.
Click
Printer
and change
High Speed Print Enabled
to
YES
.
3.
Click
Save and Continue
.
4.
Click
Restart
.
2.8.17
Enable SafeCom Go
On the SafeCom Controller web interface you need to:
1.
Open the
Advanced Configuration
web page (2.7.2).
2.
Click
Printer
and change
Printer Manufacturer
to
XEROX
or
SHARP
.
3.
Change
SafeCom Go
to
YES
.
4.
Click
Save and Continue
.
5.
Click
Restart
.
