2 SafeCom Controller
D60700-07
18
2.3
Setup process via SafeCom Color Front-end
The SafeCom Color Front-end initiates the setup process when it is not
configured (either fresh out of the box or after a restore factory default).
User MUST be Technician or Administrator in the SafeCom solution.
1.
The screen shows:
Searching. Please wait…
Broadcast messages are sent to find the SafeCom Server.
2a.
Select SafeCom Server
. Select one on the list and touch
Select
.
2b. If no SafeCom Server is found you are prompted for the IP address.
Server IP
. Enter the IP address and touch
OK
.
The dialog will reappear until the SafeCom Controller has been able to
contact the SafeCom Server.
3.
Select Printer Driver
. Touch
Select
.
4.
Select Printer Connection
. Touch
Network – 9100 port
. Touch
Select
.
5.
Printer IP
. Enter IP address and touch
OK
.
The screen shows:
Setup Completed. Restarting
2.4
Setup process via SafeCom Administrator
The SafeCom Controller’s LAN light changes from flashing to fixed when an IP
address is set. Next you need to determine the IP address of the SafeCom
Controller so you can add it to the SafeCom solution.
Find IP address via broadcasting
Use
SafeCom Administrator
and the
Broadcast
function. However,
broadcasting does not work if the SafeCom Controller is on a different
VLAN.
Find IP address in the DHCP server
Log in to the
DHCP server
and lookup the assigned IP address based on
the MAC address. The MAC address of the SafeCom Controller is printed
on the white label on the bottom of the SafeCom Controller. The MAC
address is a 12-digit hexadecimal number. Example: 00C076FF00F2.
1.
Start
SafeCom Administrator
.
2.
Log in to the server by double-clicking its Group name listed to the left.
3.
Enter
User logon
(default is ADMIN) and
Password
(default is nimda).
IP address known from DHCP server:
4a. Click
Add device
.
5a. In the
Address
field for Device/Controller, enter the IP address or
hostname of the SafeCom Controller and click
Next
. Proceed to step 8.
Find it via Broadcasting:
4b. Click on the
Find
button and select
Devices
.
5b. Click
Broadcast…
6b. Right-click on the SafeCom Controller in the list and click
Add device
.
7b. Click
Next
.
