NTT docomo FOMA N702iS, Manual

Page: 96 / 480

94
Making/Receiving Videophone
Calls
S
e
tt
ing f
o
r Swit
c
hing be
tw
een
V
o
ic
e Ca
ll and
Video
phon
e Call
Sending messages during videophone calls (while sending the
camera image) <Petit message>
1
Videophone in-call screen (P.85)
p
(FUNC) “Petit message” Enter a
message
The message appears. The message automatically disappears after 15 seconds.
You can enter up to 16 full-pitch characters.
■ To cancel message entry in the message screen
Erase the entire message
t
■ To erase the message manually after displaying the message
t
(1 second or longer)
You can also erase the message by selecting “Off decoration” from the function menu.
<Indicate V-phone>
Setting for Switching between Voice Call and Videophone Call
You can notify the other party that your own FOMA terminal supports the switch between voice call and
videophone call.
●
Setting this function to “Indication ON” enables the switching operation at the caller side after notifying the caller that
switching is available when you receive a call.
● You cannot set this function during a call or while “ ” appears.
1
Video-phone settings screen (P.91) “Indicate V-phone” Select any item:
Indication ON …… Notifies the other party that your own FOMA terminal supports the switch between voice call and
videophone call.
Indication OFF …… Does not notify the other party that your own FOMA terminal supports the switch between voice
call and videophone call.
Check indication …… Displays the settings of “Indicate V-phone”.
<Hands-free switch>
Setting the Hands-free Operation for Videophone Calls
You can set the FOMA terminal to switch to hands-free mode automatically when starting a videophone call.
1
Video-phone setting screen (P.91) “Hands-free switch” “ON” or “OFF”
N
z
As the camera image of yourself is a mirror image, text appears reversed and cannot be read correctly.
N
z
Even when “Hands-free switch” is set to “ON”, you can cancel the hands-free mode by pressing
o
( ) during the call.
z
The FOMA terminal does not switch to hands-free mode automatically in the following cases even when “Hands-free switch” is set to
“ON”:
・ While Manner mode is set.
・ When an earphone/microphone with switch (optional) is connected. (However, the microphone operation follows the “Select
microphone” setting.)
・ When holding a call or Record message is activated for the incoming call.
Default setting
Indication ON
Default setting
ON