NTT docomo FOMA N702iS, Manual

Page: 441 / 480

20
Easy settings: “Specifying Packet communication
settings using other providers”
1
Click “
かんたん設定
” (Easy settings)
2
Select “ パケット通信 ” (Packet communication) and click “ 次へ ” (Next)
3
Select “ その他 ” (Other) and click “ 次へ ” (Next)
4
Click “OK”
The access point (APN) settings will be obtained from the FOMA terminal which is connected to the
PC.
Wait for a while.
5
Specify the packet
communication settings
After the terminal setting is completely
acquired, the screen “
パケット通信設定 ”
(Packet communication setting) appears.
Enter any name in “
接続名 ” (Connection name).
You cannot use the following reserved
characters: ¥/:
＊ ?!<> │ (half-pitch only).
If “ 発信者番号通知を行う ” (Notify Caller ID) is
checked on, the Caller ID will be notified when
communication is carried out.
APN:mopera.net is specified for the mopera U
connection and APN:mopera.ne.jp for the
mopera connection by default in “
接続先
（ APN ）の選択 ” (Select the access point
(APN)).
6
Click “ 接続先（ APN ）設定 ”
(Specify the access point (APN))
As the APN of mopera “mopera.ne.jp” is
assigned to cid1 and APN of mopera U
“mopera.net” to cid3 by default, assign the APN
to cid2 or between cid4 to cid10.
Open the “
接続先（ APN ）の追加 ” (Add the
access point (APN)) screen by clicking the “ 追
加 ” (Add) button, specify an access point name
that supports FOMA packet communication and
click “OK”. The “
接続先（ APN ）設定 ” (Specify
the access point (APN)) screen reappears.
Half-pitch alphanumeric characters, hyphen (-)
and dots (.) can only be entered for the access
point.
7
Select the Access point (APN) and click “OK”
The screen of Step 5 reappears.
The access point (APN) entered in Step 6 is displayed on “
接続先（
APN
）の選択
” (Select the access
point (APN)).