NTT docomo FOMA N702iS, Manual

Page: 465 / 480

44
Running dial-up connection
This section describes how to make a dial-up connection for packet communication by using the dial-
up setting.
<Example: For Windows XP>
1
Connect the FOMA terminal to the PC with the FOMA USB Cable
(optional)
“Connecting the devices” → p.6
2
Open “ スタート ” (Start) → “ すべてのプログラム ” (All programs) → “ ア
クセサリ
” (Accessories)
→
“
通信
” (Communication)
→
“
ネットワーク
接続
” (Network connections)
3
Open Access point
Select the dial-up access point icon with the
ISP name set in Step 7 on p.42 to select “
ネッ
トワークタスク ” (Network task) → “ この接続を
開始する ” (Start this connection) or double-click
the icon of the access point.
4
Confirm the settings and click
“
ダイヤル
” (Dial)
This screen is an example for mopera U
connection. You can leave user name and
password blank for mopera U or mopera
connection.
<The Connecting screen appears>
While this screen appears, the log-on
process such as confirmation of the user
name and password is performed.
<Completion of the connection>
When the connection is complete, a
message appears from the indicator of the
taskbar located on the bottom-right of the
desktop for a few seconds.
You can start browser software to browse
sites and websites or to use e-mail.
If this messages does not appear, check
“Setting up Dial-up Network” (p.30) and
“Setting up Dial-up” (p.37).
See p.25 for communication conditions.