NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
8
2.
STARTING THE DEVICE
2.1. Getting the device ready to work
Unpack the device carefully.
After unpacking make sure that there are the following elements:
If any of the elements has been damaged during transport, pack ale the elements back into the original
packaging and contact your supplier.
ATTENTION!
If the device has been taken from a room with lower temperature you have to wait untill it warms
up to the temperature in the room where it will work. You mustn’t switch the device on after it
has been taken from a colder room. Condensation of steam, present in the air, might cause short
circuit and, consequently, damage the device.
CAUTION: Before starting the device you need to familiarise yourself with the
description and the role of particular inputs which are on the back panel.
NV-DVR5009 or NV-DVR5016 rcorder.
IR remote control.
Rack mounting bracket and screws to install
additional HDDs.
Power cord.
CD with a user’s manual and
network software.
STARTING THE DEVICE
User’s manual and network
software guide
