NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
33
RECORDER’S MENU
Highlight the PTZ tab, and the PTZ setup screen displays.
In order to assure a proper cooperation of the device with PTZ cameras these settings should
correspond to the camera settings. When there are no PTZ cameras in the system there is no need to
make any changes in this tab.
In the PTZ tab you also define communication port settings for PTZ camera control and a given camera
protocol type and ID.
In the port position you choose telemetry port, where PTZ commands will be transmitted and define its
parameters (transmission speed, bit number, stop bit and parity).
NOTE:
You will only be able to set up PTZ devices if the PTZ port is set to RS232 or RS485. You
will not be able to use a modem if you are using the RS232 port for PTZ control.
NOTE:
You cannot simultaneously connect PTZ camera control and recorder’s keyboard to the RS-
485 port. To connect the keyboards and speed domes cameras simultaneously you need to use RS232 /
RS485 converter.
In the Product box choose a telemetry protocol from the ones which are available (e.g. Novus-C, Pelco-
P and Pelco-D) and which is in accordance with PTZ camera settings.
In the ID box set PTZ camera number in accordance with the camera settings. It is advised you set
camera number in accordance with recorder’s camera input number to which is will be connected.
