NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
51
RECORDER’S OPERATION
Widok dla NV-DVR1600
4.2. Active Cameo Mode
You can enter the Active Cameo mode by pressing the
button in any multi-view format. The yellow
outline surrounding the video indicates the active cameo, and pressing the arrow buttons moves the
active cameo. Pressing the
button while in the Active Cameo mode exits the Active Cameo mode.
The active cameo mode will remains in effect for 15 seconds if there is no further operation.
In active cameo mode, press the numeric button for the camera you want displayed as active cameo
(with the yellow outline). After setting the camera number to active cameo, the DVR moves the active
cameo to the next cameo. You can change the screen layout in this way.
Attention: Particular cameras may be shown only once within a single screen, that is picture from
a particular camera may not be shown more than once on the screen of one user.
4.3. PIP Mode
You can display a Picture-in-Picture by pressing the DISPLAY button. You can change the location of
the PIP counterclockwise and clockwise by pressing the Up and Down arrow buttons and change its
size by turning the Jog Dial clockwise or counterclockwise.
4.4. Zoom Mode
You can enlarge an area of the video by pressing the ZOOM button. For a few seconds after pressing
the ZOOM button, a PIP displays. Inside the PIP, a rectangle shows the area that is enlarged. You can
move the rectangle around using the arrow buttons. While in the Zoom mode, you can enlarge the area
more by pressing the
button. The Zoom mode options are 2x, 3x and 4x. Exit the Zoom mode by
pressing the ZOOM button. While in the Zoom mode, the icon
displays in bottom-left corner if
Zoom is selected in the Display setup screen (OSD tab).
4.5. PTZ Mode
If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The
DVR will control cameras with Pan, Tilt and Zoom capabilities. Press the PTZ button to enter the PTZ
mode and press the button again to exit the PTZ mode. You can control the camera using front panel
control buttons, by setting up presets or by selecting the expanded PTZ features.
Once the PTZ buton is pressed, cameras defined as PTZ will be shown on the screen PTZ. Select the
PTZ camera you wish to control from the menu with the help of Up and Down arrow buttons. The icon
displays on the PTZ camera screen.
Use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press the Up
and Down arrow buttons to tilt the camera up and down. Press the
button to zoom in, and press the
button to zoom out. You can use the
and
buttons to focus the image.
