NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
46
RECORDER’S MENU
3.5.2. Motion detection
Highlight Motion Detection in the Event menu and press the
button. The Motion Detection setup
screen appears:
His DVR has a built-in video motion detection. In the No. column this motion detection can be turned
on and off for each camera.
Highlighting the box under the Sensitivity heading allows you to adjust the DVR’s sensitivity to
motion. There are five settings with 1 being the least sensitive and 5 being the most sensitive
In the Zone column, active motion detection is defined. Highlight the box under the Zone heading, and
press the
button. The Motion Detection Zone screen (16x16) displays.
The Motion Detection Zone screen is laid over the video for the selected camera
Attention: You can set up motion zones one block at a time in groups of 8 or 16 individual block
groups (9- and 16-channel DVR respectively). A block group is positioned within the image area using
the Up and Down arrow buttons, and individual blocks within the block groups are selected or cleared
using the camera buttons. A white square over an individual block denotes that motion detection is
active for this block.
Press the
button to display the menu screen. The menu on the setup screen has the following
functions
•
Select — Activates highlighted blocks to detect motion.
•
Clear — Deactivates highlighted blocks so that they will not detect motion.
•
Reverse — Activates inactive highlighted blocks and deactivates active highlighted blocks.
•
Select All — Activates all blocks to detect motion.
•
Clear All — Deactivates all blocks so that they will not detect motion
