NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
52
RECORDER’S OPERATION
Widok dla NV-DVR1600
To program a preset, direct the camera at a selected scene and press Enter.
When the PTZ dialog box appears, select the number you want to assign to the preset and press the
button. Use the virtual keyboard to enter the preset name. Press the
button to load the PTZ preset
and the Preset View dialog box will appear. Select the desired preset and press the
button to load the
preset.
Pressing the MENU button displays the PTZ menu. Set the feature you wish to control by selecting it
from the menu. Refer to the camera manufacturer’s instructions for the proper settings. Depending on
the camera specifications, some features may not be supported.
You can use a USB mouse for convenient PTZ control. Position the mouse point at the bottom of the
screen, and the following PTZ toolbar will display.
Clicking on the left side exits the toolbar. If you want to display the toolbar again, position the mouse
pointer at the bottom of the screen. Change the toolbar location by clicking the empty space on the left
side of the toolbar and drag it to where you want it located on the screen.
4.6. Image adjustment
It is important that cameras and monitors are correctly installed and adjusted (sharpness, white balance)
prior to making any image adjustments using the DVR’s controls.
If a user who has Color Control authority logs into the system, the user can adjust the image. Pressing
and holding a camera button for a few seconds displays an image adjustment dialog. You can control
the following settings for each camera:
•
brightness,
•
contrast,
•
hue,
•
saturation.
NOTE: Any image adjustments you make will be applied to both life image on the monitors and to
recorded video
