NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
30
RECORDER’S MENU
The factory default Port settings are:
Remote Admin:
8200
Remote Call-back:
8201
Remote Watch:
8016
Remote Search:
10019
NOTE:
Do NOT use the same port number for two different programs, otherwise, the DVR cannot be
connected with a PC running RAS.
When changing the port settings, you must change the port settings on the PC running RAS as well.
Refer to the RAS manual for details.
For the ADSL network connection with PPPoE protocol you need to manually configure connection
parameters as far as ID number and passwords are concerned.
NOTE:
The ADSL and modem cannot be configured at the same time. If the DVR is configured by
modem, the
ADSL (with PPPoE)
will not be selected.
Entering the
ID
and
Password
and highlighting
OK
reads the current IP address of the DVR configured
by ADSL network. If the DVR is configured by DHCP or ADSL network, the IP address of the DVR
might change whenever the unit is turned on.
3.2.1.3.
Modem
When you want to initiate a modem connection please turn to the distributor of the device. The DVR
does not cooperate with the PSTN modems.
3.2.1.4.
DVRNS
This option is not activated for the current firmware.
