NV-DVR5009 / NV-DVR5016 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
9
1.
Fan cooling power supply unit, it shouldn’t be covered!
2.
VIDEO IN/LOOP
:
video inputs to hook up camera video signal with arterial outputs of video
signal, 16 or 9 depending on the model.
3.
VIDEO OUT, SVHS OUT
: connectors to connect the main monitor, Composite Video Signal
(CVS) or S-Video mode, it is possible to chose one out of many display
modes.
4.
RS-485
:
RS-485 bus connector to connect a control line of speed dome cameras
working in this standard or to connect NV-KBD60 system keyboard.
5.
SPOT 1/2/3/4
CVS
outputs to connect backup monitors, full screen display of any camera
or sequence of cameras and split display for the first monitor (TRIPLEX
function).
6.
ARI (Alarm Reset Input):
external signal applied to ARI and GND connectors is able to
cancel active relay outputs and the internal buzzer of the recorder. The
minimum voltage of the applied signal should be 0,3V and last about 0,5sec,
to deactivate it
.
7.
socket to connect network cord 100 ~ 230 V AC, you need to make sure that
the plug is plugged in correctly and provides a stable connection between
contacts and it is connected to a grounded network, power cord
shouldn’t
be unnecessarily bent.
8.
AUDIO IN 1/2/3/4
:
4 mono audio inputs (RCA connectors) to connect microphones.
Attention: sound recording can only take place when legal regulations of a
given country allow it.
9.
AUDIO OUT:
audio output to connect a speaker with an amplifier.
10. ALARM INPUTS
: alarm inputs, which from the menu level can be set as normally open (N.O.)
or normally closed (N.C.), 16 or 9 according to a model. In order for the
signal to be detected it has to last at least 0.5sec. All GND connectors are at
common ground. The ground alarm device need to be connected with one
of the GND connectors.
2.2. Electrical connection and other back panel elements
NV-DVR5016 View
STARTING THE DEVICE
7
3
5
4
2
1
6
8
9
10
