OSCILLATOR SECTION
Pitch
-
Button
Mod Depth -
Knob
ENV 3
-
Button
This combination controls the Pitch Modulation of the selected Oscillator by ENV 3. Turning the Mod Depth Knob fully clockwise
introduces Pitch shift from ENV 3 to the selected Oscillator in a Positive direction. ( Up) Turning the Mod Depth Knob fully anti-
clockwise introduces Pitch shift from ENV 3 to the selected Oscillator in a Negative direction. ( Down ) In the “Mid” position there is
no modulation at all. The range of this parameter is -64 to +63.
This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an
attempt is made to adjust this parameter when these sound sources are selected & the display will show “Not Available”.
Pitch
-
Button
Mod Depth -
Knob
Wheel
-
Button
This combination controls the Pitch Modulation of the selected Oscillator by the Mod Wheel. Turning the Mod Depth Knob fully
clockwise introduces Pitch shift from Mod Wheel to the selected Oscillator in a Positive direction. ( Up) Turning the Mod Depth
Knob fully anticlockwise introduces Pitch shift from Mod Wheel to the selected Oscillator in a Negative direction. ( Down ) In the
“Mid” position there is no modulation at all. The range of this parameter is -64 to +63.
This parameter is calibrated in semitones, so a setting of 12 will produce an octave shift ( Up ) in the selected oscillator when a
Mod Wheel value of 127 is received.
This does not apply to the Noise, 1*3 & 2*3 Ring Modulator outputs. No audible effect to these sound sources will be heard if an
attempt is made to adjust this parameter when these sound sources are selected & the display will show “Not Available”.
Width
-
Button
Level
-
Knob
This combination controls the Pulse Width of the selected Oscillator. Turning the Level Knob fully clockwise makes the selected
Oscillator Pulse Width very thin. In the mid position the Pulse Width is 25% - 75% & fully anticlockwise the Pulse Width is 50% -
50%. The range of this parameter is -64 to +63.
This does not apply to the Oscillators that have Saw Waveforms selected or the Noise, 1*3 & 2*3 Ring Modulator outputs. No audi-
ble effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are
selected & the display will show “Not Available”.
Width
-
Button
Mod Depth -
Knob
LFO 1
-
Button
This combination controls the Pulse Width Modulation of the selected Oscillator by LFO 1. Turning the Mod Depth Knob fully clock-
wise introduces Pulse Width Modulation from LFO 1 to the selected Oscillator in a Positive direction. Turning the Mod Depth Knob
fully anticlockwise introduces Pulse Width Modulation from LFO 1 to the selected Oscillator in a Negative direction. In the “Mid”
position there is no modulation at all. The range of this parameter is -64 to +63.
This does not apply to the Oscillators that have Saw Waveforms selected or the Noise, 1*3 & 2*3 Ring Modulator outputs. No audi-
ble effect to these sound sources will be heard if an attempt is made to adjust this parameter when these sound sources are
selected & the display will show “Not Available”.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
76
Summary of Contents for Supernova II
Page 145: ...145 NOTES...
