manualshive.com logo in svg

Novation Supernova II, User Manual

Share
Download
Novation Supernova II User Manual Download Page 69

It is only possible to copy an Oscillator to another oscillator.

To exit this mode without copying an Oscillator, press the copy button again. ( the Copy button is unlit )

Unison - Button

This button activates the Unison mode..  When this parameter is set to Off ( unlit ) only one voice is used per note in a Program.
When this parameter is set to On ( lit ) more than one voice is used per note in a Program. The number of voices used per note is
determined by the Unison Voice No parameter on the next page. The Detuning of the voices is controlled by the Unison Detune
parameter on the next page. The range of this parameter is On & Off. This parameter is memorised with a Program.

Saw Waveform

-

Button

Sq waveform

-

Button

Special Waveform -

Button

.
This is a menu of oscillator waveforms for the oscillator selected with the Osc 1, 2, & 3 buttons. To adjust the waveform of oscillator
1 press “Osc 1” button & select the waveform required. The selected waveform will light. The Saw button selects a Sawtooth wave-
form, the Sq button selects a Square waveform & the Special button selects Audio input 1, Audio input 2., the 8 inputs from the
ADAT Digital input & the 2 inputs from the SPDIF Digital input. ( only if the optional ADAT/SPDIF Digital I/O option is fitted ) & new
additional waveforms to be available here with future software upgrades. This parameter is memorised with a Program.

These buttons do not apply to the Ring Mod Oscillators ( 1*3 & 2*3 ) or the Noise Generator.

Octave/Semi

Knob

Cents

-

Knob

These knobs determine the Octave setting, Semitone transposition & fine tuning of the selected Oscillator.
Turning the Octave/Semi knob clockwise raises the pitch of the selected oscillator by one semitone per click. Similarly turning the
Octave/Semi knob anticlockwise lowers the pitch of the selected oscillator by one semitone per click.The total amount of transposi-
tion available is +/- 3 Octaves.

When this knob is turned clockwise one click from the 0 oct 0 semi setting position the display shows:

When this knob is turned anticlockwise one click from the 0 oct 0 semi setting position the display shows:

When this knob is turned clockwise one click from the 0 oct +11 semi setting position the display shows:

Octave               +1
Semitones             O

Octave               -1
Semitones           +11

Octave                O
Semitones            +1

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

NOTE:

OSCILLATOR SECTION

69

Summary of Contents for Supernova II





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands