manualshive.com logo in svg

Novation Supernova II, User Manual

Share
Download
Novation Supernova II User Manual Download Page 74

OSCILLATOR SECTION

Possible Combinations & the effects Produced.

All these parameters are memorised with a Program.

Mix

-

Button

Level

-

Knob

This combination controls the Volume of the selected Oscillator, Noise Generator or Ring Modulator. Turning the Level Knob fully
clockwise turns the selected sound source to full volume & fully anticlockwise turns the selected sound source to off. ( No Volume )
The range of this parameter is 000 to 127.

Mix

-

Button

Mod Depth -

Knob

LFO 1

-

Button

This combination controls the modulation of the Mix of the selected Oscillator, Noise Generator or Ring Modulator by LFO 1.
Turning the Mod Depth Knob fully clockwise introduces Mix modulation from LFO 1 to the selected sound source in a Positive
direction. Turning the Mod Depth Knob fully anticlockwise introduces Mix modulation from LFO 1 to the selected sound source in a
Negative direction. In the “Mid” position there is no modulation at all. The range of this parameter is -64 to +63.

Mix

-

Button

Mod Depth -

Knob

LFO 2

-

Button

This combination controls the modulation of the Mix of the selected Oscillator, Noise Generator or Ring Modulator by LFO 2.
Turning the Mod Depth Knob fully clockwise introduces Mix modulation from LFO 2 to the selected sound source in a Positive
direction. Turning the Mod Depth Knob fully anticlockwise introduces Mix modulation from LFO 2 to the selected sound source in a
Negative direction. In the “Mid” position there is no modulation at all. The range of this parameter is -64 to +63.

Mix

-

Button

Mod Depth -

Knob

ENV 2

-

Button

This combination controls the modulation of the Mix of the selected Oscillator, Noise Generator or Ring Modulator by ENV 2.
Turning the Mod Depth Knob fully clockwise introduces Mix modulation from ENV 2 to the selected sound source in a Positive
direction. Turning the Mod Depth Knob fully anticlockwise introduces Mix modulation from ENV 2 to the selected sound source in a
Negative direction. In the “Mid” position there is no modulation at all. The range of this parameter is -64 to +63.

Mix

-

Button

Mod Depth -

Knob

ENV 3

-

Button

This combination controls the modulation of the Mix of the selected Oscillator, Noise Generator or Ring Modulator by ENV 3.
Turning the Mod Depth Knob fully clockwise introduces Mix modulation from ENV 3 to the selected sound source in a Positive
direction. Turning the Mod Depth Knob fully anticlockwise introduces Mix modulation from ENV 3 to the selected sound source in a
Negative direction. In the “Mid” position there is no modulation at all. The range of this parameter is -64 to +63.

Mix

-

Button

Mod Depth -

Knob

Wheel

-

Button

This combination controls the modulation of the Mix of the selected Oscillator, Noise Generator or Ring Modulator by the Mod
Wheel. Turning the Mod Depth Knob fully clockwise introduces Mix modulation from the Mod Wheel to the selected sound source
in a Positive direction. Turning the Mod Depth Knob fully anticlockwise introduces Mix modulation from the Mod Wheel to the
selected sound source in a Negative direction. In the “Mid” position there is no modulation at all. The range of this parameter is -64
to +63.

NOTE:

NOTE:

74

Summary of Contents for Supernova II





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands