EFFECTS SECTION
Page 4 looks like so:
The higher parameter is “Delay Wheel”. In this case with a value of +20.
This parameter determines how much the Mod Wheel controls the amount of Delay effect. Use the upper Data knob to adjust this
parameter. Fully anticlockwise, the Delay will be reduced with full modulation of the Mod Wheel. Fully clockwise, the Delay will be
increased with full modulation of the Mod Wheel. The range of this parameter is -64 to +63. This parameter is memorised with a
Program in Program Mode or memorised with a Program or Performance in Performance Mode depending on the value of the
Part’s “Part FX” parameter.
Reverb Level - Knob
This knob adjusts the level of the Reverb effect to be assigned to the selected Program. Turning this knob fully anticlockwise will
allow the signal to be unaffected by the Reverb, turning this knob fully clockwise will fully implement the Reverb effect. The range
of this parameter is 000 to 127. This parameter is memorised with a Program in Program Mode or memorised with a Program or
Performance in Performance Mode depending on the value of the Part’s “Part FX” parameter.
Menu - Button ( Reverb )
When this button is pressed, a series of pages is available on the display containing parameters relevant to this section.
In the Reverb section there are 3 pages available. These are selected using the page Up & page Down buttons to the left of the
display.
There are a maximum of 2 parameters displayed on any page. One for each line on the display. The upper & lower Data knobs on
the right of the display are used to alter these parameter’s values.
Page 1 looks like so:
The higher parameter is “Type”. In this case with a value of Big room.
This parameter determines the type of Reverb effect.. Use the higher Data knob to adjust this parameter. There are 16 different
types of reverb available in the Supernova II Rack. Turning this knob fully anticlockwise selects Gated reverse reverb. This is a
special reverb where the reverb builds to a point & then stops as opposed to decaying away like normal reverb. Turning this knob
clockwise one click selects Gated rising, Again this is a gated type of reverb that is slightly reverse in characteristic. Turning this
knob clockwise one click selects Gated gentle which is a classic gated sort of reverb. Turning this knob clockwise one click selects
Gated falling which is a gated type of reverb but does decay away slightly like normal reverb. Turning this knob clockwise one click
selects Dry chamber. This is the first of the normal reverb types & represents a very small room. The rest of the reverbs model
rooms that gradually get bigger & bigger, the last one being Large plate 2. The range of this parameter is Gated reverse, Gated ris-
ing, Gated gentle, Gated falling, Dry chamber, Echo chamber, Small room, Big room, Medium type 1, Medium type 2, Medium
plate 1, Medium plate 2, Large type 1, Large type 2, Large plate 1 & Large plate 2. This parameter is memorised with a Program in
Program Mode or memorised with a Program or Performance in Performance Mode depending on the value of the Part’s “Part FX”
parameter.
The lower parameter is “Early ref level”. In this case with a value of 6.
This parameter determines the level of early reflections in the reverb. Use the lower Data knob to adjust this parameter. The range
of this parameter is 0 to 7. This parameter is memorised with a Program in Program Mode or memorised with a Program or
Performance in Performance Mode depending on the value of the Part’s “Part FX” parameter.
Type
Big room
Early ref level 6
Delay wheel +2O
100
Summary of Contents for Supernova II
Page 145: ...145 NOTES...
