manualshive.com logo in svg

Novation Supernova II, User Manual

Share
Download
Novation Supernova II User Manual Download Page 37

Editing Performances is very easy. After Pressing the Performance button the button lights & the Display shows:

Performances are made up of 8 Parts. The next thing to do is select the “Part” of the Performance you wish to edit. To do this
press the appropriate Part button in the Part edit section. In the above example pressing Part 1 button the display will show:

The display is showing the Program currently assigned to the selected Part. Any Program from any one of the Program Banks can
be assigned to any Part of a Performance. You can use the Bank button & the keypad buttons to alter the Program assigned to this
Part of the Performance. 

When in this mode, pressing the Tune, Velocity, Output, MIDI, Polyphony & Range buttons will display the relative parameters for
the currently selected Part. If any of the Tune, Velocity, Output, MIDI, Polyphony & Range buttons are pressed it will flash indicating
that it has been selected. This allows easy comparison of values in different Parts. For example, press the MIDI button after Part 1
of a Performance has been selected & the display will show:

The MIDI button is flashing indicating it is selected. Pressing another Part button will light the selected button & the display will
show the MIDI parameters for the newly selected Part as shown below.

To exit any of the Tune, Velocity, Output, MIDI, Polyphony & Range Menus, simply press the Performance button again & the dis-
play will change back to showing the currently selected Performance as shown below:

Alternatively, pressing the flashing Part button will return the display to the Performance ( If no part button had been selected ) or
the display will show the Program assigned to the currently selected part. ( If a Part button had been selected ) 

For details on the parameters in the “Tune”, “Velocity”, “Output”, “MIDI”, “Polyphony”, & “Range” menus refer to the “Part Edit
Section” of this manual on page 113.

Blaster Master

Perf AOOO

Sustain         Disable
MIDI channel   

8

Sustain        

Enable

MIDI channel   

Global

DigiTrowserCough

Prog AO3O

Blaster Master

Perf AOOO

EDITING & WRITING PERFORMANCES

37

Summary of Contents for Supernova II





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands