GETTING STARTED
PAGE
|
12
web: www.Novanta.com
Getting Started
Use information in this section to prepare your i401 laser for operation. The or-der of information
presented in this section is the same as the order of tasks that you will need to perform. The best way to
get your laser ready for operation is to start at unpacking and work your way through connecting.
This section contains the following information:
Introduction – introduces the i401 laser, lists important features, and describes i401 nomenclature.
Unpacking – provides important information about unpacking your i401 laser.
Inventory – displays and describes all components shipped with your i401 laser.
Mounting – describes how to attach your i401 laser to a mounting surface.
Connecting – explains how to connect cooling tubing, power, and control cabling.
Introduction
The Introduction section includes subsections:
•
I401 nomenclature
•
Model numbers
The i401 laser is a new addition to Novanta i401 series of high-power lasers. This single tube 400 W laser
features an integrated RF power supply with no external RF cables. The compact, single- tube design
mounts easily to flatbed cutters, robotic arms, or gantry systems making integration into your
production line simple and fast.
i401 features include:
•
Built-in electromechanical shutter
•
Built-in gas purge port
•
TCP/IP web-based Internet interface
•
Color-coded LEDs mirror user output status
•
Field-replaceable integrated RF modules
•
“Industrial-strength” ±5 V to 24 VDC I/O
•
Built-in internal humidity sensor
•
Beam output pre-aligned to within ±1.0 mm
•
Duty cycles from 1% to 100% (CW)
•
Low 6 kW heat load
