NAVIGAT X Mk 2
056341 Rev. AA
8: Gyroshpere Installation and Service
Page 8-15
13) Take the protective capsule containing the empty phial of mercury and in-
sulating fluid from the installation and replacement parts kit. Remove the
phial from the capsule and open it.
10) Unscrew the 4mm Allen-head screws at-
taching the two halves of the gyroshere
container.
11)
Put the screws and washers aside, mak-
ing sure they won't be lost or fall to the
ground.
12) Take off the upper section of the gyro-
sphere container and place it upside
down on the work surface.
Caution
Take care not to damage the contact pins.
14) Assemble the syringe and cannula. In-
sert the syringe into the recess of the gy-
rosphere. Draw up the mercury and insu-
lating fluid completely.
Hg
Warning
Spilt mercury will evaporate and give off poisonous fumes.
Collect spilt mercury with the syringe provided in the installation and replace-
ment parts kit and seal it in the phial for the mercury and insulating fluid.
Summary of Contents for Sperry Marine NAVIGAT X MK 2
